SYNTHETIC GLOVES

Description

The PPE is also identifiable by the following means :
– The product picture
– Each PPE wears the name indicated on this declaration of conformity.
– Each PPE wears the bar code indicated in the annex to this declaration of conformity
– Each PPE wears a batch number. For any further information, just give it to us. Our organization, based on
this batch number, allows us to ensure the traceability of the PPE.
EU DECLARATION OF CONFORMITY
This declaration of conformity is issued under the sole responsibility of the manufacturer.
The object of the declaration identified above is in conformity with the relevant Union harmonisation legislation:
EU 2016/425 Regulation, with its requirements and with the harmonised standards:
REGULATION (EU) 2016/425
EN420:2003+A1:2009 General requirements
5: Dexterity (from 1 to 5)
EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro- organisms – Part 1:
Terminology and performance requirements for chemical risks.
B: Type B – Water and air tightness according to EN374-2:2014. Permeation resistance to at least 3 chemicals at level
2 according to EN16523-1: 2015 (from 1 to 6).
.: Determination of resistance to degradation by chemicals according to EN374-4: 2013. Part 4: Determination of
resistance to degradation by chemicals.
3 > 60 mn: n-Heptane (J) CAS 142-85-5
6 > 480 mn: Caustic soda 40% (K) CAS 1310-73-2
6 > 480 mn: Formaldehyde 37% (T) CAS 50-00-0
EN ISO 374-5: 2016 Protective gloves against dangerous chemicals and micro-organisms – Part 5:
Terminology and performance requirements against micro- organisms risks: VIRUS.
.: BACTERIA + FUNGI : Water and air tightness according to EN374-2:2014.
.: VIRUSES : Determination of resistance to penetration by bloodborne pathogens according to ISO 16604.
DECLARATION OF CONFORMITY
DELTA PLUS GROUP- ZAC La Peyrolière – BP 140 – 84405 Apt FRANCE cedex – Tel :+33 (0)4 90 74 20 33 – Fax :+33 (0)4 90 74 32 59
E.mail :information@deltaplus.fr – Web : www.deltaplus.eu
2/2
0493 – CENTEXBEL (TECHNOLOGIEPARK 70 09052 ZWIJNAARDE BELGIQUE) :
Notified body which performed the EU Type- examination (module B) and issued EU type-examination
certificate: 033 2018 0387
The PPE is subject to the conformity assessment procedure to type based on internal production control plus
supervised product checks at random intervals (Module C2) under surveillance of the notified body : 0598 – SGS
FIMKO OY (TAKOMOTIE 8 FI-00380 HELSINKI FINLAND )
REGULATION (EU) 1935/2004 CONTACT WITH FOOD PRODUCTS
GLOB MIGR Food contact – Overall Migration
.: Contact with any type of food
SPECIFIC QUALIFYING CONFORMANCES
EN455-1 Single use medical gloves – Hole detection
EN455-2 Single use medical gloves – Physical properties
EN455-3 Single use medical gloves – biological evaluation