SYNTHETIC GLOVES

Description

The PPE is also identifiable by the following means :
– The product picture
– Each PPE wears the name indicated on this declaration of conformity.
– Each PPE wears the bar code indicated in the annex to this declaration of conformity
– Each PPE wears a batch number. For any further information, just give it to us. Our organization, based on
this batch number, allows us to ensure the traceability of the PPE.
EU DECLARATION OF CONFORMITY
This declaration of conformity is issued under the sole responsibility of the manufacturer.
The object of the declaration identified above is in conformity with the relevant Union harmonisation legislation:
EU 2016/425 Regulation, with its requirements and with the harmonised standards:
REGULATION (EU) 2016/425
EN420:2003+A1:2009 General requirements
5: Dexterity (from 1 to 5)
EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)
4: Resistance to abrasion (from 1 to 4)
1: Resistance to cutting (from 1 to 5)
0: Resistance to tear (from 1 to 4)
1: Resistance to puncture (1 to 4)
X: Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)
DECLARATION OF CONFORMITY
DELTA PLUS GROUP- ZAC La Peyrolière – BP 140 – 84405 Apt FRANCE cedex – Tel :+33 (0)4 90 74 20 33 – Fax :+33 (0)4 90 74 32 59
E.mail :information@deltaplus.fr – Web : www.deltaplus.eu
2/3
EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro- organisms – Part 1:
Terminology and performance requirements for chemical risks.
A: Type A – Water and air tightness according to EN374-2:2014. Permeation resistance to at least 6 chemicals at level
2 according to EN16523-1: 2015,
.: Determination of resistance to degradation by chemicals according to EN374-4: 2013. Part 4: Determination of
resistance to degradation by chemicals.
3 > 60 mn: Méthanol (A) CAS 67-56-1
6 > 480 mn: n-Heptane (J) CAS 142-85-5
4 > 120 mn: Sulphuric acid 96 % (L ) CAS 7664-93-9
5 > 240 mn: Ammonium hydroxide 25% (O) CAS 1336-21-6
6 > 480 mn: Hydrogen peroxide 30% (P) 7722-84-1
6 > 480 mn: Formaldehyde 37% (T) CAS 50-00-0
EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms – Part 5:
Terminology and performance requirements against micro- organisms risks.
.: BACTERIA + FUNGI : Water and air tightness according to EN374-2:2014.
0321 – SATRA TECHNOLOGY CENTRE (WYNDHAM WAY, TELFORD WAY, NOR NN16 8SD KETTERING ROYAUMEUNI) :
Notified body which performed the EU Type- examination (module B) and issued EU type-examination
certificate: 0321 10720 01 E01 01
The PPE is subject to the conformity assessment procedure to type based on quality assurance of the production
process (module D) under surveillance of the notified body: 0321 – SATRA TECHNOLOGY CENTRE (WYNDHAM
WAY, TELFORD WAY, NOR NN16 8SD KETTERING ROYAUME-UNI )