Description

The PPE is also identifiable by the following means :
– The product picture
– Each PPE wears the name indicated on this declaration of conformity.
– Each PPE wears the bar code indicated in the annex to this declaration of conformity
– Each PPE wears a batch number. For any further information, just give it to us. Our organization, based on
this batch number, allows us to ensure the traceability of the PPE.
EU DECLARATION OF CONFORMITY
This declaration of conformity is issued under the sole responsibility of the manufacturer.
The object of the declaration identified above is in conformity with the relevant Union harmonisation legislation:
EU 2016/425 Regulation, with its requirements and with the harmonised standards:
REGULATION (EU) 2016/425
EN397:2012 + A1:2012 Protective helmets for industry
MM: Molten metal spray
LD: Lateral deformation
-30°C +150°C: Use : Very high temperature – -30 ° C / + 150 ° C
440VAC: Electric insulation
EN50365:2002 Electrically insulating helmets for use on low voltage installations
0: Electrically insulating helmets – Class 0

2008 – DOLOMITICERT S.C.A.R.L. (Z.IND. VILLANOVA N°7/A 32013 LONGARONE (BL) ITALIE) :
Notified body which performed the EU Type- examination (module B) and issued EU type-examination
certificate: EC 12 0063 REV3
The PPE is subject to the conformity assessment procedure to type based on quality assurance of the production
process (module D) under surveillance of the notified body: 0082 – APAVE SUDEUROPE (CS60193 13322
MARSEILLE CEDEX 16 FRANCE )