HIGH-TECH GLOVES

Description

The PPE is also identifiable by the following means :
– The product picture
– Each PPE wears the name indicated on this declaration of conformity.
– Each PPE wears the bar code indicated in the annex to this declaration of conformity
– Each PPE wears a batch number. For any further information, just give it to us. Our organization, based on
this batch number, allows us to ensure the traceability of the PPE.
EU DECLARATION OF CONFORMITY
This declaration of conformity is issued under the sole responsibility of the manufacturer.
The object of the declaration identified above is in conformity with the relevant Union harmonisation legislation:
EU 2016/425 Regulation, with its requirements and with the harmonised standards:
REGULATION (EU) 2016/425
EN420:2003+A1:2009 General requirements
3: Dexterity (from 1 to 5)
EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)
3: Resistance to abrasion (from 1 to 4)
2: Resistance to cutting (from 1 to 5)
3: Resistance to tear (from 1 to 4)
3: Resistance to puncture (1 to 4)
B: Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)
P: Protection against impact in metacarpal area (P) (EN13594:2002 6.8.2)
0075 – C.T.C. (PARC TONY GARNIER 4 RUE HERMANN FRENKEL 69367 LYON CEDEX 07 FRANCIA) :
Notified body which performed the EU Type- examination (module B) and issued EU type-examination
certificate: 0075 022 162 11 12 0926 REV03