ANCHORAGE – WORK POSITIONING

Description

The PPE is also identifiable by the following means :
– The product picture
– Each PPE wears the name indicated on this declaration of conformity.
– Each PPE wears the bar code indicated in the annex to this declaration of conformity
– Each PPE wears a batch number. For any further information, just give it to us. Our organization, based on
this batch number, allows us to ensure the traceability of the PPE.
EU DECLARATION OF CONFORMITY
This declaration of conformity is issued under the sole responsibility of the manufacturer.
The object of the declaration identified above is in conformity with the relevant Union harmonisation legislation:
EU 2016/425 Regulation, with its requirements and with the harmonised standards:
REGULATION (EU) 2016/425
EN363 : 2008 Personal fall protection equipment – Personal fall protection systems
EN364 : 1992 Personal protective equipment against falls from a height : Test method
EN365 : 2004 Personal protective equipment against falls from a height – General requirements
for the instructions for use, maintenance, periodic examination, repair, marking and packaging.
EN795:2012 Personal fall protection equipment : Anchorage devices
B: Anchorage device type B
EN354 : 2010 Personal fall protection equipment – Lanyards.
DECLARATION OF CONFORMITY
DELTA PLUS GROUP- ZAC La Peyrolière – BP 140 – 84405 Apt FRANCE cedex – Tel :+33 (0)4 90 74 20 33 – Fax :+33 (0)4 90 74 32 59
E.mail :information@deltaplus.fr – Web : www.deltaplus.eu
2/2
2008 – DOLOMITICERT S.C.A.R.L. (Z.IND. VILLANOVA N°7/A 32013 LONGARONE (BL) ITALIE) :
Notified body which performed the EU Type- examination (module B) and issued EU type-examination
certificate: EC 17 0032
The PPE is subject to the conformity assessment procedure to type based on quality assurance of the production
process (module D) under surveillance of the notified body: 0082 – APAVE SUDEUROPE (CS60193 13322
MARSEILLE CEDEX 16 FRANCIA )